Partnerzy

Streszczenie:
New Surfactant PolyIon Complex (SPIC) micelles were assembled by electrostatic complexation of an antibacterial cationic surfactant, cetylpyridinium chloride (CPC), and a double hydrophilic block copolymer (DHBC) containing a neutral comb block of poly(oligo(ethylene glycol)) methyl ether acrylate (PEOGA) and a weak polyacid block of poly(acrylic acid) (PAA). The corresponding SPIC micelles, with a CPC/PAA core and a PEOGA corona, were successfully used as structure directing and functionalizing agents in a soft and sustainable sol-gel strategy, yielding hybrid mesoporous silica (MS) materials with a monomodal pore size distribution centred at 2.8 nm. The influence of synthesis parameters, including the pH, concentrations and ratios of components, was systematically investigated. The obtained hybrid MS materials were intrinsically functional, with PEOGA blocks anchored in silica walls via H-bonding, while weak polyacid blocks, complexed with CPC, were confined within the mesopores. The response of the materials to pH changes (pH 7.4, 4.2 and 3) indicated remarkable stability of the anchored DHBC, while CPC was selectively released under the acidic conditions typical of orodental biofilm microenvironments. This result is noteworthy, since the release of encapsulated amphiphilic drugs into water is less favorable than that of hydrophilic drugs. Owing to the control of their pore and functionality properties, ordered hybrid silica materials templated and functionalized with SPIC systems will be materials of choice for developing pH-responsive biomedical devices using wet processing techniques

Słowa kluczowe:
Double hydrophilic block copolymer, Cooperative self-assembly, Surfactant-polyion complex micelle, Stimuli-responsive nanomaterials, Sustainable, Sol-gel synthesis

Streszczenie:
Developing saloplastics composed of Compacted Polyelectrolyte Complexes (COPECs) represents a promising strategy for assembling multifunctional and processable polymer matrices in a simple manner. Here, a comprehensive investigation of the potential application of saloplastics as ion reactors for designing catalysts has been performed. First the propensity of saloplastics to exchange and concentrate ions has been elucidated through investigating the influence of Na+ to Cu2+ cation exchange within COPECs assembled from poly(methacrylic acid) (PMAA) and poly(allylamine hydrochloride) (PAH). The multi-scale responses of PMAA/PAH COPECs upon incubation with CuCl2 solutions at pH 3 and 4.5 were investigated chemically by ATR-FTIR, ICP, XPS, DSC and TGA, morphologically by SEM, and mechanically by strain-to-break measurements. Both the amplitude and the kinetics of the COPEC response were driven by the deprotonation rate of PMAA chains, enabling the formation of bridge complexes with Cu2+ and impacting the saloplastic's composition (water content and polyelectrolytes), structure (emergence of macropores) and mechanical properties. Kinetic-based tuning of the molality of copper ions trapped in PMAA/PAH COPECs was demonstrated, enabling the usage of saloplastics as reactors. This ability allowed controlling the growth of Cu(0) nanoparticles in saloplastics by thermal annealing, ultimately adjusting their catalytic activity toward carbon monoxide (CO) oxidation. This work highlights how the ionic reservoir properties of saloplastics must be accounted for when designing the applications of COPEC-based materials.

Streszczenie:
Compact polyelectrolyte complexes (COPECs), also named saloplastics, represent a new class of material with high fracture strain and self-healing properties. Here, COPECs based on poly(methacrylic acid) (PMAA) and poly(allylamine hydrochloride) (PAH) were prepared by centrifugation at pH 7. The influence of postassembly pH changes was monitored chemically by ATR-FTIR, ICP, DSC, and TGA, morphologically by SEM, and mechanically by strain to break measurements. Postassembly pH stimuli misbalanced the charge ratio in COPECs, impacting their concentration in counterions, cross-link density, and polymer chain mobility. At the material level, changes were observed in the porosity, composition, water content, and mechanical properties of COPECs. The cross-link density was a prominent factor governing the saloplastic's composition and water content. However, the porosity and mechanical properties were driven by several factors including salt-induced plasticization and conformational changes of polyelectrolytes. This work illustrates how multiple-scale consequences arise from a single change in the environment of COPECs, providing insights for future design of stimuli-responsive materials.

Streszczenie:
In this study, composites of aluminum alloy 6063 reinforced with 10 wt% boron carbide microparticles were successfully fabricated by a combination of spark plasma sintering and stir casting methods, followed by hot extrusion. A systematic study on the relationship between extrusion process variables (i.e. extrusion ratio, temperature, and punch speed) and porosity, particle refinement, particle distribution and consequently tensile properties and fracture behavior of the composites was performed. Extensive electron microscopy analysis and tensile testing of the composites revealed a multifactoral interdependency of microstructural evolution and mechanical properties on the extrusion process variables. For example, while increasing the extrusion ratio at higher temperatures led to moderate particle refinement, better densification of the composites, and improvement in mechanical properties, concurrent particle fragmentation and microvoid formation around the particles at lower temperatures had opposing effects on the mechanical behavior. We show that the dependency of mechanical properties on all such microstructural factors makes it difficult to predict optimum extrusion conditions in aluminum matrix composites. That is, unlike the common approach, extruding the composites at higher temperatures and achieving more reduction in area may not necessarily lead to the most favorable mechanical properties.

Słowa kluczowe:
Aluminum matrix composite, Hot extrusion, Mechanical behavior, Microstructure, Spark plasma sintering, Stir casting

Streszczenie:
There have been many investigations on metal matrix microcomposites produced by conventional casting routes; however, in the past decade, the focus has shifted more toward nanocomposites produced via solid state routes. To have a realistic view of performance prediction and optimum design of such composites, in this work Al matrix composites (AMCs) reinforced with WC microparticles, nanoparticles, and bimodal micro-/nano-particles were prepared by spark plasma sintering. The effects of particle size and concentration, and process variables (i.e. sintering temperature, duration, and pressure) on the evolution of microstructure, density and hardness of the composites were studied comprehensively. Full densification of AMCs with high particle concentration was problematic because of ceramic cluster formations in the microstructure. This effect was more emphasized in AMCs containing nanoparticles. AMCs with microparticles were more easily densified, but their hardness benefits were inferior. On the other hand, the mixture of micro- and nano-particles in Al-WC bimodal composites led to better matrix reinforcement integrity and an overall improvement in the microstructural properties. Finally, increasing the sintering temperature improved the microstructural features and hardness of the composites (more enhanced in high wt.% samples), but sintering duration and pressure did not have a big impact on the composite properties.

Słowa kluczowe:
composite, nanoparticle, microparticle, powder metallurgy, SPS, microstructure