| 1. |
Girard G.♦, Frydrych K., Kowalczyk-Gajewska K., Martiny M.♦, Mercier S.♦, Cyclic response of electrodeposited copper films. Experiments and elastic-viscoplastic mean-field modeling,
Mechanics of Materials, ISSN: 0167-6636, DOI: 10.1016/j.mechmat.2020.103685, Vol.153, pp.103685-1-17, 2021 Streszczenie:
The goal of the present work is to identify and model the elastic-viscoplastic behavior of electrodeposited copper films under tension-compression loadings. From the experimental point of view, as proposed in the literature, a film of copper is electrodeposited on both sides of an elastic compliant substrate. The overall specimen is next subjected to tensile loading-unloadings. As the substrate remains elastic, the elastic–plastic response of copper under cyclic loading is experimentally determined. A clear kinematic hardening behavior is captured. To model the mechanical response, a new elastic-viscoplastic self-consistent scheme for polycrystalline materials is proposed. The core of the model is the tangent additive interaction law proposed in Molinari (2002). The behavior of the single grain is rate dependent where kinematic hardening is accounted for in the model at the level of the slip system. The model parameters are optimized via an evolutionary algorithm by comparing the predictions to the experimental cyclic response. As a result, the overall response is predicted. In addition, the heterogeneity in plastic strain activity is estimated by the model during cyclic loading. Słowa kluczowe:
electrodeposited copper, self-consistent scheme, elasto-viscoplasticity, kinematic hardening, experiments Afiliacje autorów:
| Girard G. | - | Lorraine University (FR) | | Frydrych K. | - | IPPT PAN | | Kowalczyk-Gajewska K. | - | IPPT PAN | | Martiny M. | - | Lorraine University (FR) | | Mercier S. | - | Clermont Université (FR) |
|  | 100p. |
| 2. |
Czarnota C.♦, Kowalczyk-Gajewska K., Salahouelhadj A.♦, Martiny M.♦, Mercier S.♦, Modeling of the cyclic behavior of elastic–viscoplastic composites by the additive tangent Mori–Tanaka approach and validation by finite element calculations,
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, ISSN: 0020-7683, DOI: 10.1016/j.ijsolstr.2014.12.002, Vol.56-57, pp.96-117, 2015Streszczenie:
This work deals with the prediction of the macroscopic behavior of two-phase composites, based on the Mori–Tanaka scheme combined with an additive/sequential interaction rule and tangent linearization of viscoplastic response. Cyclic tension compression loadings are considered to further validate the approach. The composite is made of spherical inclusions dispersed in a matrix. Both materials have an elastic–viscoplastic behavior. In a second part, finite element calculations are performed using ABAQUS/STANDARD software in order to validate the proposed homogenization technique. A representative volume element is analyzed with 30 randomly distributed inclusions. Comparisons between the additive tangent Mori–Tanaka scheme and finite element calculations are made for different volume fractions of inclusions, different contrasts in elastic and viscous properties and different strain rates and strain amplitudes. These comparisons demonstrate the efficiency of the proposed homogenization scheme. The effect of isotropization of the viscoplastic tangent stiffness is also investigated. It is concluded that quality of predictions does not benefit from such simplification, contrary to the known result for elastic–plastic case. Słowa kluczowe:
Elasto-viscoplasticity, Homogenization, Finite element, Composite, Mori–Tanaka scheme Afiliacje autorów:
| Czarnota C. | - | CNRS (FR) | | Kowalczyk-Gajewska K. | - | IPPT PAN | | Salahouelhadj A. | - | Lorraine University (FR) | | Martiny M. | - | Lorraine University (FR) | | Mercier S. | - | Clermont Université (FR) |
| | 40p. |
