Partnerzy

Słowa kluczowe:
Adsorption,Thermal desorption,Gd-doped Fe3O4,Methotrexate

Słowa kluczowe:
Drug delivery, Hydroxyapatite, Anticancer, 5-fluorouracil, Curcuminoids, Nanocomposite

Streszczenie:
Commendable efforts have been gingered towards the fight against cancer. Nevertheless, it remains a major public health concern due to its predominant cause of death globally. Given this, we synthesized two different nanoparticles, Sr2+ and Gd3+ doped magnetite for magnetic hyperthermia and drug delivery application. Based on the characterization, the diffractogram shows that only one phase related to magnetite with a crystallite size of 10 nm was formed. TEM images revealed nanoparticles of spherical shapes of approximately 12 nm. There is no difference in magnetic saturation of the as-received synthesized samples (Fe3O4@Sr and Fe3O4@Gd), while the BET-specific surface area of Fe3O4@Gd is 8 m2 g−1 higher than Fe3O4@Sr. The heat generation in alternating magnetic field (the magnetic hyperthermia) of Fe3O4@Sr functionalized with citric acid and loaded with 5- fluorouracil (Fe3O4@Sr@CA@5-flu) is slower than Fe3O4@Gd@CA@5-flu. The specific absorption rate (SAR) of Fe3O4@Gd@CA@5-flu, 112.0 ± 10.4 W g−1 was found to be higher than that of Fe3O4@Sr@CA@5-flu. The thermogram shows that 11% of the drug was successfully loaded on Fe3O4@Gd@CA@5-flu. The release of the antitumor drug by the synthesized nanoparticle drug carriers for ovarian cancer (SKOV-3 cells) therapy showed that more than 50% of the cancer cell’s viability was reduced after 72 h of incubation. The synthesized nanoparticles demonstrated a promising drug carrier for the treatment of SKOV-3 cells.

Streszczenie:
Adsorption and photocatalytic degradation techniques for removing various contaminants have received broad consideration and acceptance due to their advantages over conventional wastewater treatment techniques. Iron- based materials are among several groups of adsorbents, and photocatalysts that have proven to be effective in pharmaceuticals-based pollutants removal from wastewater. Pharmaceutical drug removal is accompanied by several mechanisms, so there is a deep need for a better understanding of the complexity and development of wastewater treatment using iron-based materials. Therefore, this review examined the mechanism of adsorption
and photocatalysis degradation of pharmaceuticals in aqueous solutions by iron-based materials. The adsorption of pharmaceutical drugs was found to be influenced by changes in the solution pH. The mechanism of removal of
these contaminants by iron-based materials through adsorption occurred via electrostatic, π-π, and hydrogen bond interactions among others. In the case of photocatalysis, the first mechanism occurred through the for-
mation the hydroxyl radicals due to highly reactive species (electrons and holes) that partook in the reaction processes, while the second mechanism is related to the formation of hydrogen peroxide, H2O2, by photo-
generated electrons in the conduction band and with the well-known photo dissolution of iron oxide leading to free Fe2+ and Fe3+ ions. The overall idea of this review is to provide useful information on the mechanisms of
adsorption and photocatalytic degradation of pharmaceutical contaminants using iron-based materials. The re-view summarizes the current understanding and the advances in the pharmaceutical-bearing effluent treatment using nanostructured adsorbents and photocatalysts, including future developments for a cleaner and safer environment.

Słowa kluczowe:
Mechanism,Iron-based materials,Pharmaceutical drugs,Adsorption,Photo(degradation)

Streszczenie:
In this study, eco-friendly Fe3O4-lignin (FeL) and Fe3O4-carbon-based lignin (FeCL) were synthesized, characterized, and applied for the adsorption of tetracycline (TRC) and ceftriaxone (CEF). Comparative characterization showed that the BET-specific surface area of FeCL is 27 m2/g more than that of FeL. The difference in their morphologies is insignificant, and the particle sizes range between 5 and 15 nm. There is a reduction in the oxygen content and hydroxyl group of FeCL as shown from the EDS and FTIR spectra respectively, compared with FeL. The adsorption capacity for the removal of TRC at 333 K is 156 and 148 mg g−1 by FeL and FeCL, respectively; while that of CEF are virtually the same. FeL and FeCL adsorption capacity for TRC increases with temperatures (endothermic), but decreases (exothermic) for CEF. The combination of experimental and computational approaches gave insight into the mechanisms of the adsorption process. The mechanisms of TRC and CEF adsorption by FeL and FeCL are the electrostatic attraction, hydrophobic, and π-π interaction, while only FeL shows the possibility of hydrogen bond with both TRC and CEF. The study demonstrated that the synthesized material can be reused for up to 3 cycles without an alarming loss of efficiency capacity.
Graphical abstract

Słowa kluczowe:
Lignin,antibiotics,Adsorption mechanisms,Thermodynamics

Streszczenie:
In this work, we present magnetic nanoparticles based on iron oxide doped with zinc syn-
thesized using the wet co-precipitation method for environmental application. The morphology of the
samples was revealed by SEM and TEM, which showed particles of granular shape and size of about
15 nm. The specific surface areas of the materials using the BET method were within the range of 85.7 to 101.5 m2 g−1 depending on the zinc content in the superparamagnetic iron oxide nanoparticles (SPI-ONs). Magnetometry was performed to determine the magnetic properties of the particles, indicating superparamagnetism. Synthesized magnetic nanoparticles with different amounts of zinc dopant were used as an adsorbent to remove model pollutant Titan yellow (TY) from the aqueous solutions. Adsorption was determined by investigating the effects of sorbent amount, dye concentration, and contact time. The synthesized material removed Titan yellow quickly and efficiently within the phys-ical adsorption. The adsorption isotherms were consistent with the models proposed by Langmuir and Redlich-Peterson. The monolayer adsorption capacities were 30 and 43 mg g−1 for Fe3O4 and Fe3O4@10%Zn, respectively, for the removal of TY. However, that of Congo red is 59 mg g−1 by Fe3O4@10%Zn. The proposed nanoparticles offer fast and cost-effective water purification, and they can be separated from solution using magnets.

Słowa kluczowe:
perparamagnetic particles, pollution treatment, Titan yellow, Congo red, adsorption isotherm, iron oxide

Słowa kluczowe:
maghemite,tetracycline,adsorption,photocatalysis,mechanism,eco-friendly water treatment

Słowa kluczowe:
superparamagnetc iron oxide nanoparticles, SPIONs, trastuzumab, magnetic hyperthermia, antitumor therapy

Słowa kluczowe:
Electrocatalysis, Ascorbic acid, Polyindole, Gold nanoparticles, Nanobrush, Hard-template synthesis

Słowa kluczowe:
CdS, thin films, photoelectrochemical studies, langmuir-blodgett technique

Słowa kluczowe:
water contamination, CdS nanoparticles, tetracycline, antibiotics photodegradation, photocatalysis, kinetic rate constant, degradation mechanism

Słowa kluczowe:
superparamagnetic iron oxide nanoparticles, SPIONs, rare-earth doping, holmium, endoradiotherapy