Instytut Podstawowych Problemów Techniki
Polskiej Akademii Nauk

Pracownicy

dr inż. Marcin Maździarz

Zakład Informatyki i Nauk Obliczeniowych (ZIiNO)
Zespół Inteligencji i Inżynierii Obliczeniowej (ZeIiIO)
stanowisko: adiunkt
telefon: (+48) 22 826 12 81 wewn.: 321
pokój: 417
e-mail:
ORCID: 0000-0003-3696-0006
strona www: http://bluebox.ippt.pan.pl/~mmazdz/

Doktorat
2003-06-24 Wpływ zjawisk kontaktowych na współpracę budowli z podłożem gruntowym w ujęciu metody elementów skończonych  (PW)
promotor -- dr hab. inż. Janusz Dłużewski, PW
 

Ostatnie publikacje
1.  Maździarz M., Uncertainty of DFT Calculated Mechanical and Structural Properties of Solids due to Incompatibility of Pseudopotentials and Exchange–Correlation Functionals, Journal of Chemical Theory and Computation, ISSN: 1549-9618, DOI: 10.1021/acs.jctc.4c01036, Vol.20, No.21, pp.9734-9740, 2024

Streszczenie:
The demand for pseudopotentials constructed for a given exchange-correlation (XC) functional far exceeds the supply, necessitating the use of those commonly available. The number of XC functionals currently available is in the hundreds, if not thousands, and the majority of pseudopotentials have been generated for LDA and PBE. The objective of this study is to identify the error in the determination of the mechanical and structural properties (lattice constant, cohesive energy, surface energy, elastic constants, and bulk modulus) of crystals calculated by DFT with such inconsistency. Additionally, this study aims to estimate the performance of popular XC functionals (LDA, PBE, PBEsol, and SCAN) for these calculations in a consistent manner.

Słowa kluczowe:
DFT, pseudopotentials, exchange–correlation functionals

Afiliacje autorów:
Maździarz M. - IPPT PAN
140p.
2.  Maździarz M., Nosewicz S., Atomistic investigation of deformation and fracture of individual structural components of metal matrix composites, ENGINEERING FRACTURE MECHANICS, ISSN: 0013-7944, DOI: 10.1016/j.engfracmech.2024.109953, Vol.298, pp.109953-1-109953-21, 2024

Streszczenie:
This paper focuses on the development of the atomistic framework for determining the lower scale mechanical parameters of single components of a metal matrix composite for final application to a micromechanical damage model. Here, the deformation and failure behavior of NiAl–Al2O3 interfaces and their components, metal and ceramic, are analyzed in depth using molecular statics calculations. A number of atomistic simulations of strength tests, uniaxial tensile, uniaxial compressive and simple shear, have been performed in order to obtain a set of stiffness tensors and strain–stress characteristics up to failure for 30 different crystalline and amorphous systems. Characteristic points on the strain–stress curves in the vicinity of failure are further analyzed at the atomistic level, using local measures of lattice disorder. Numerical results are discussed in the context of composite damage at upper microscopic scale based on images of the fracture surface of NiAl–Al2O3 composites.

Słowa kluczowe:
Metal-matrix composites (MMCs), Fracture, Computational modeling, Mechanical testing, Molecular statics

Afiliacje autorów:
Maździarz M. - IPPT PAN
Nosewicz S. - IPPT PAN
140p.
3.  Maździarz M., Comment on “Effects of shear methods on shear strengths and deformation modes of two typical transition metal carbides and their unification”, Physical Review B, ISSN: 2469-9969, DOI: 10.1103/PhysRevB.108.216101, Vol.108, No.21, pp.216101-1-216101-3, 2023

Streszczenie:
Recently, Li et al. [C. Li et al., Phys. Rev. B 107, 224106 (2023)] investigated the mechanical behavior of cubic HfC and TaC under simple shear and pure shear using first-principles calculations. Unfortunately, the paper contains some serious and fundamental flaws in the field of continuum mechanics and nanomechanics.
The results presented appear to be qualitatively and quantitatively incorrect; they would be correct if we were in the small/linear deformation/strain regime, which we are not. A correct description therefore requires a finite/nonlinear deformation/strain apparatus. The solution for simple shear, even from density functional theory calculations, must follow Frenkel’s sinusoidal solution.

Słowa kluczowe:
Simple shear, Pure shear, First principle calculation

Afiliacje autorów:
Maździarz M. - IPPT PAN
140p.
4.  Maździarz M., Transferability of interatomic potentials for germanene (2D germanium), JOURNAL OF APPLIED PHYSICS, ISSN: 0021-8979, DOI: 10.1063/5.0173745, Vol.134, No.18, pp.184303-1-184303-8, 2023

Streszczenie:
The capacities of various interatomic potentials available for elemental germanium, with the scope to choose the potential suitable for the modeling of germanene (2D germanium) allotropes,f were investigated. Structural and mechanical properties of the flat, low-buckled, trigonal dumbbell, and large honeycomb dumbbell single-layer germanium (germanene) phases, were obtained using the density functional theory and molecular statics computations with Tersoff, modified embedded atom method, Stillinger–Weber, environment-dependent interatomic potential, ReaxFF, and machine-learning-based interatomic potentials. A systematic quantitative comparative study and discussion of the findings are given.

Słowa kluczowe:
Germanene, 2D materials, Interatomic potentials, Force fields, DFT, Mechanical properties

Afiliacje autorów:
Maździarz M. - IPPT PAN
100p.
5.  Maździarz M., Transferability of interatomic potentials for silicene, Beilstein Journal of Nanotechnology, ISSN: 2190-4286, DOI: 10.3762/bjnano.14.48, Vol.14, pp.574-585, 2023

Streszczenie:
The ability of various interatomic potentials to reproduce the properties of silicene, that is, 2D single-layer silicon, polymorphs was examined. Structural and mechanical properties of flat, low-buckled, trigonal dumbbell, honeycomb dumbbell, and large honeycomb dumbbell silicene phases, were obtained using density functional theory and molecular statics calculations with Tersoff, MEAM, Stillinger–Weber, EDIP, ReaxFF, COMB, and machine-learning-based interatomic potentials. A quantitative systematic comparison and a discussion of the results obtained are reported.

Słowa kluczowe:
2D materials, DFT, silicene, interatomic potentials, mechanical properties, force fields

Afiliacje autorów:
Maździarz M. - IPPT PAN
100p.
6.  Maździarz M., Psiuk R., Krawczyńska A., Lewandowska M., Mościcki T., Effect of zirconium doping on the mechanical properties of W1−xZrxB2 on the basis of first‑principles calculations and magnetron sputtered films, ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, ISSN: 1644-9665, DOI: 10.1007/s43452-022-00513-6, Vol.22, No.193, pp.1-30, 2022

Streszczenie:
Potentially superhard W1−xZrxB2 polymorphs, hP6-P63/mmc-WB2 and hP3-P6/mmm-WB2 , were thoroughly analyzed with zirconium doping in the range of x=0-25%, within the framework of the first-principles density functional theory, from both a structural and a mechanical point of view. The obtained results were subsequently compared with the properties of material deposited by the magnetron sputtering method. All predicted structures are mechanically and thermodynamically stable. Theoretical calculations suggest a decrease in hardness Hv and fracture toughness KIC of the hP6 phase with zirconium doping but no such effect on the hP3 phase. It was observed that an additional defect in the analyzed structure significantly weakens the hP6 phase but strengthens the hP3 phase. The deposited films are characterized by greater hardness but lower fracture toughness. The results of experiments show that not only is solid solution hardening responsible for strengthening the predicted new material but also the change in microstructure, the Hall–Petch effect and vacancies.

Słowa kluczowe:
Ab initio, Transition metal borides, Mechanical properties, Magnetron sputtered coatings, Hardness

Afiliacje autorów:
Maździarz M. - IPPT PAN
Psiuk R. - IPPT PAN
Krawczyńska A. - Politechnika Warszawska (PL)
Lewandowska M. - inna afiliacja
Mościcki T. - IPPT PAN
140p.
7.  Maździarz M., Transferability of molecular potentials for 2D molybdenum disulphide, Materials, ISSN: 1996-1944, DOI: 10.3390/ma14030519, Vol.14, No.3, pp.519-1-14, 2021

Streszczenie:
An ability of different molecular potentials to reproduce the properties of 2D molybdenum disulphide polymorphs is examined. Structural and mechanical properties, as well as phonon dispersion of the 1H, 1T and 1T' single-layer MoS2 (SL MoS2) phases, were obtained using density functional theory (DFT) and molecular statics calculations (MS) with Stillinger-Weber, REBO, SNAP and ReaxFF interatomic potentials. Quantitative systematic comparison and discussion of the results obtained are reported.

Słowa kluczowe:
2D materials, MoS2, molecular potentials, DFT, elastic constants, phonons

Afiliacje autorów:
Maździarz M. - IPPT PAN
140p.
8.  Kowalczyk-Gajewska K., Maździarz M., Elastic properties of nanocrystalline materials of hexagonal symmetry: the core-shell model and atomistic estimates, International Journal of Engineering Science, ISSN: 0020-7225, DOI: 10.1016/j.ijengsci.2020.103393, Vol.157, pp.103393-1-21, 2020

Streszczenie:
Anisotropic core-shell model of a nano-grained polycrystal is extended to estimate the effective elastic stiffness of several metals of hexagonal crystal lattice symmetry. In the approach the bulk nanocrystalline material is described as a two-phase medium with different properties for a grain boundary zone and a grain core. While the grain core is anisotropic, the boundary zone is isotropic and has a thickness defined by the cutoff radius of a corresponding atomistic potential for the considered metal. The predictions of the proposed mean-field model are verified with respect to simulations performed with the use of the Large-scale Atomic/Molecular Massively Parallel Simulator, the Embedded Atom Model, and the molecular statics method. The effect of the grain size on the overall elastic moduli of nanocrystalline material with random distribution of orientations is analyzed.

Słowa kluczowe:
molecular statics, elasticity, polycrystal, effective medium, hexagonal symmetry

Afiliacje autorów:
Kowalczyk-Gajewska K. - IPPT PAN
Maździarz M. - IPPT PAN
200p.
9.  Maździarz M., Mościcki T., New zirconium diboride polymorphs—first-principles calculations, Materials, ISSN: 1996-1944, DOI: 10.3390/ma13133022, Vol.13, No.13, pp.3022-1-13, 2020

Streszczenie:
Two new hypothetical zirconium diboride (ZrB 2) polymorphs: (hP6-P6 3 /mmc-space group, no. 194) and (oP6-Pmmn-space group, no. 59), were thoroughly studied under the first-principles density functional theory calculations from the structural, mechanical and thermodynamic properties point of view. The proposed phases are thermodynamically stable (negative formation enthalpy). Studies of mechanical properties indicate that new polymorphs are less hard than the known phase (hP3-P6/mmm-space group, no. 191) and are not brittle. Analysis of phonon band structure and density of states (DOS) also show that the phonon modes have positive frequencies everywhere and the new ZrB 2 phases are not only mechanically but also dynamically stable. The estimated acoustic Debye temperature, ΘD, for the two new proposed ZrB 2 phases is about 760 K. The thermodynamic properties such as internal energy, free energy, entropy and constant-volume specific heat are also presented.

Słowa kluczowe:
zirconium diboride, ab initio calculations, mechanical properties, elastic properties, phonons

Afiliacje autorów:
Maździarz M. - IPPT PAN
Mościcki T. - IPPT PAN
140p.
10.  Kowalczyk-Gajewska K., Maździarz M., Effective stiffness tensor of nanocrystalline materials of cubic symmetry: the core-shell model and atomistic estimates, International Journal of Engineering Science, ISSN: 0020-7225, DOI: 10.1016/j.ijengsci.2019.103134, Vol.144, pp.103134-1-24, 2019

Streszczenie:
Anisotropic core-shell model of a nano-grained polycrystal, proposed recently for nanocrystalline copper, is applied to estimate elastic effective properties for a set of crystals of cubic symmetry. Materials selected for analysis differ in the lattice geometry (face-centered cubic vs. body-centered cubic) as well as the value of a Zener factor: a ratio of two shear moduli defining elastic anisotropy of a cubic crystal. The predictions are verified by means of the atomistic simulations. The dependence of the overall bulk and shear moduli on the average grain diameter is analysed. In the mean-field approach the thickness of the shell is specified by the cutoff radius of a corresponding atomistic potential, while the grain shell is isotropic and its properties are identified by molecular simulations performed for very small grains with approximately all atoms belonging to the grain boundary zone. It is shown that the core-shell model provides predictions of satisfactory qualitative and quantitative agreement with atomistic simulations. Performed study indicates that the variation of the bulk and shear moduli with the grain size changes qualitatively when the Zener anisotropy factor is smaller or greater than one.

Słowa kluczowe:
molecular statics, elasticity, polycrystal, effective medium, cubic symmetry

Afiliacje autorów:
Kowalczyk-Gajewska K. - IPPT PAN
Maździarz M. - IPPT PAN
200p.
11.  Maździarz M., Comment on 'The computational 2D materials database: high-throughput modeling and discovery of atomically thin crystals', 2D Materials, ISSN: 2053-1583, DOI: 10.1088/2053-1583/ab2ef3, Vol.6, No.4, pp.048001-1-3, 2019

Streszczenie:
Recently Haastrup et al 2018 (2D Mater. 5 042002) introduced the Computational 2D Materials Database (C2DB), which organises a variety of structural, thermodynamic, elastic, electronic, magnetic, and optical properties of around 1500 two-dimensional materials distributed over more than 30 different crystal structures. Unfortunately, the work contains serious and fundamental flaws in the field of elasticity and mechanical stability tests that make it unreliable.

Słowa kluczowe:
ab initio calculations, elastic stability, 2D materials, materials discovery

Afiliacje autorów:
Maździarz M. - IPPT PAN
140p.
12.  Maździarz M., A comment on the article "Ab initio calculations of pressure-dependence of high-order elastic constants using finite deformations approach" by I. Mosyagin, A.V. Lugovskoy, O.M. Krasilnikov, Yu.Kh. Vekilov, S.I. Simak and I.A. Abrikosov [Computer Physics Communications 220 (2017) 20–30], COMPUTER PHYSICS COMMUNICATIONS, ISSN: 0010-4655, DOI: 10.1016/j.cpc.2018.02.021, Vol.235, pp.293-294, 2019

Słowa kluczowe:
ab initio calculations, elastic moduli, pressure effects in solids and liquids, finite deformations, solid mechanics, deformation gradient

Afiliacje autorów:
Maździarz M. - IPPT PAN
140p.
13.  Nosewicz S., Rojek J., Wawrzyk K., Kowalczyk P., Maciejewski G., Maździarz M., Multiscale modeling of pressure-assisted sintering, COMPUTATIONAL MATERIALS SCIENCE, ISSN: 0927-0256, DOI: 10.1016/j.commatsci.2018.10.001, Vol.156, pp.385-395, 2019

Streszczenie:
This report presents the modeling of pressure-assisted sintering within the framework of a multiscale approach. Three individual numerical methods have been collectively applied to predict the behavior of a sintering body at three different scales. The appropriate solutions to connect each model/scale have been proposed. Molecular dynamics have been employed to evaluate the grain boundary diffusion coefficient at the atomistic scale. The obtained results of diffusive parameters have been transferred to the micromechanical model of sintering. Here, the discrete element method was used to represent the sintered material properties at the microscopic scale. Micromechanical based results have been validated by own experimental data of material density evolution, indicating the required coincidence. The transfer from micro- to the macroscopic model has been realized by determining the macroscopic viscous moduli from discrete element simulations and subsequently applying them to the continuum model of sintering. The numerical results from finite element simulations at the macroscopic scale have been compared with discrete element ones.

Słowa kluczowe:
sintering, multiscale modeling, discrete element method, molecular dynamics, finite element method

Afiliacje autorów:
Nosewicz S. - IPPT PAN
Rojek J. - IPPT PAN
Wawrzyk K. - inna afiliacja
Kowalczyk P. - IPPT PAN
Maciejewski G. - inna afiliacja
Maździarz M. - IPPT PAN
100p.
14.  Kowalczyk-Gajewska K., Maździarz M., Atomistic and mean-field estimates of effective stiffness tensor of nanocrystalline copper, International Journal of Engineering Science, ISSN: 0020-7225, DOI: 10.1016/j.ijengsci.2018.04.004, Vol.129, pp.47-62, 2018

Streszczenie:
The full elasticity tensor for nano-crystalline copper is derived in molecular simulations by performing numerical tests for a set of generated samples of the polycrystalline material. The results are analysed with respect to the anisotropy degree of the overall stiffness tensor resulting from the limited number of grain orientations and their spatial distribution. The dependence of the overall bulk and shear moduli of an isotropized polycrystal on the average grain diameter is analysed. It is found that while the shear modulus decreases with grain size, the bulk modulus shows negligible dependence on the grain diameter and is close to the bulk modulus of a single crystal. A closed-form mean-field model of effective elastic properties for a bulk nano-grained polycrystal with cubic grains, i.e. made of a material with cubic symmetry, is formulated. In the model all parameters are based on the data for a single crystal and on the averaged grain size without any need for additional fitting. It is shown that the proposed model provides predictions of satisfactory qualitative and quantitative agreement with atomistic simulations.

Słowa kluczowe:
Molecular statics, Elasticity, Polycrystal, Effective medium, Nano-crystalline copper

Afiliacje autorów:
Kowalczyk-Gajewska K. - IPPT PAN
Maździarz M. - IPPT PAN
40p.
15.  Maździarz M., Mrozek A., Kuś W., Burczyński T., Anisotropic-Cyclicgraphene: A New Two-Dimensional Semiconducting Carbon Allotrope, Materials, ISSN: 1996-1944, DOI: 10.3390/ma11030432, Vol.11, No.3, pp.432, 2018

Streszczenie:
A potentially new, single-atom thick semiconducting 2D-graphene-like material, called Anisotropic-cyclicgraphene, has been generated by the two stage searching strategy linking molecular and ab initio approach. The candidate was derived from the evolutionary-based algorithm and molecular simulations was then profoundly analysed using first-principles density functional theory from the structural, mechanical, phonon, and electronic properties point of view. The proposed polymorph of graphene (rP16-P1m1) is mechanically, dynamically, and thermally stable and can achieve semiconducting with a direct band gap of 0.829 eV.

Słowa kluczowe:
carbon, graphene, graphyne, ab initio calculations, Semiconductors

Afiliacje autorów:
Maździarz M. - IPPT PAN
Mrozek A. - AGH University of Science and Technology (PL)
Kuś W. - Silesian University of Technology (PL)
Burczyński T. - IPPT PAN
35p.
16.  Maździarz M., Rojek J., Nosewicz S., Molecular dynamics study of self-diffusion in stoichiometric B2-NiAl crystals, Philosophical Magazine, ISSN: 1478-6435, DOI: 10.1080/14786435.2018.1480838, Vol.98, No.24, pp.2257-2274, 2018

Streszczenie:
Self-diffusion parameters in stoichiometric B2-NiAl solid state crystals were estimated by molecular statics/dynamics simulations with the study of required simulation time to stabilise diffusivity results. An extrapolation procedure to improve the diffusion simulation results was proposed. Calculations of volume diffusivity for the B2 type NiAl in the 1224–1699 K temperature range were performed using the embedded-atom-model potential. The results obtained here are in much better agreement with the experimental results than the theoretical estimates obtained with other methods.

Słowa kluczowe:
NiAl nickel–aluminium, diffusivity, molecular dynamics, molecular statics, embedded-atom method, sintering

Afiliacje autorów:
Maździarz M. - IPPT PAN
Rojek J. - IPPT PAN
Nosewicz S. - IPPT PAN
30p.
17.  Maździarz M., Mrozek A., Kuś W., Burczyński T., First-principles study of new X-graphene and Y-graphene polymorphs generated by the two stage strategy, MATERIALS CHEMISTRY AND PHYSICS, ISSN: 0254-0584, DOI: 10.1016/j.matchemphys.2017.08.066, Vol.202, pp.7-14, 2017

Streszczenie:
Two potentially new, 2D-graphene-like materials have been generated by the two stage searching strategy combining molecular and ab initio approach. The two candidates obtained from the evolutionary based algorithm and molecular calculations were then in depth analysed using first-principles Density Functional Theory from the mechanical, structural, phonon and electronic properties point of view. Both proposed polymorphs of graphene (oP8-P2mm) are mechanically and dynamically stable and can be metallic-like.

Słowa kluczowe:
Carbon, Graphene, Ab initio calculations, Mechanical properties, Elastic properties

Afiliacje autorów:
Maździarz M. - IPPT PAN
Mrozek A. - AGH University of Science and Technology (PL)
Kuś W. - Silesian University of Technology (PL)
Burczyński T. - IPPT PAN
35p.
18.  Maździarz M., Rojek J., Nosewicz S., Estimation of micromechanical NiAl sintering model parameters from the molecular simulations, INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, ISSN: 1543-1649, DOI: 10.1615/IntJMultCompEng.2017020289, Vol.15, No.4, pp.343-358, 2017

Streszczenie:
Molecular statics/dynamics estimation of constitutive parameters for a micromechanical NiAl sintering model is reported in this paper. The parameters include temperature-dependent diffusion coefficients, surface energy, and linear thermal expansion. These parameters define material behavior during sintering and are used in the sintering particle model implemented in the discrete element model. The investigated material, the NiAl intermetallic, belongs to novel materials characterized by advantageous mechanical properties. Various machine elements are manufactured from a pure NiAl powder or from powder mixtures containing the NiAl using the sintering technology. It is well known that sintering is governed by diffusion. Therefore diffusive properties are important parameters of the micromechanical model of sintering. Numerical estimation of the model parameters by simulations at the lower scale is a powerful tool alternative to experimental methods. Molecular statics and dynamics models for NiAl have been created using the embedded atom model potential. Numerical simulations have allowed us to estimate the volume, surface, and grain-boundary diffusivity for the B2-type NiAl in the 1573 to 1673 K temperature range. Dependence of the diffusion coefficients on temperature has been determined and validity of the Arrhenius-type temperature dependency has been assessed. The parameters evaluated numerically have been compared with available experimental data as well as with theoretical predictions obtained with other methods. Many of the results presented in this paper have a pioneer character and are not known in the literature.

Słowa kluczowe:
NiAl, sintering, diffusivity, molecular dynamics, molecular statics, nanoparticles

Afiliacje autorów:
Maździarz M. - IPPT PAN
Rojek J. - IPPT PAN
Nosewicz S. - IPPT PAN
25p.
19.  Domagała J.Z., Morelhão S.L., Sarzyński M., Maździarz M., Dłużewski P., Leszczyński M., Hybrid reciprocal lattice: application to layer stress determination in GaAlN/GaN(0001) systems with patterned substrates, JOURNAL OF APPLIED CRYSTALLOGRAPHY, ISSN: 1600-5767, DOI: 10.1107/S1600576716004441, Vol.49, No.3, pp.798-805, 2016

Streszczenie:
Epitaxy of semiconductors is a process of tremendous importance in applied science and in the optoelectronics industry. The control of defects introduced during epitaxial growth is a key point in manufacturing devices of high efficiency and durability. In this work, it is demonstrated how useful hybrid reflections are for the study of epitaxial structures with anisotropic strain gradients due to patterned substrates. High accuracy in detecting and distinguishing elastic and plastic relaxations is one of the greatest advantages of measuring this type of reflection, as well as the fact that the method can be exploited in a symmetric reflection geometry on a commercial high-resolution diffractometer.

Słowa kluczowe:
optoelectronics, Group III-nitride semiconductors, epitaxial growth, X-ray multiple diffraction, interface defects

Afiliacje autorów:
Domagała J.Z. - Institute of Physics, Polish Academy of Sciences (PL)
Morelhão S.L. - University of Sao Paulo (BR)
Sarzyński M. - Military University of Technology (PL)
Maździarz M. - IPPT PAN
Dłużewski P. - IPPT PAN
Leszczyński M. - inna afiliacja
40p.
20.  Maździarz M., Mościcki T., Structural, mechanical, optical, thermodynamical and phonon properties of stable ReB2 polymorphs from density functional calculations, JOURNAL OF ALLOYS AND COMPOUNDS, ISSN: 0925-8388, DOI: 10.1016/j.jallcom.2015.10.133, Vol.657, pp.878-888, 2016

Streszczenie:
Three mechanically and dynamically stable polymorphs of rhenium diboride (ReB2) (space group: P63/mmc, No: 194), (space group: R-3m, No: 166) and (space group: Pmmn, No: 59) were thoroughly analysed within the framework of Density Functional Theory from the structural, mechanical, optical, thermodynamical and phonon properties point of view. The calculated hardness of rhombohedral structure suggests that it can be even harder than well known hexagonal ReB2.

Słowa kluczowe:
Rhenium diboride, Phase stability, Density Functional Theory (DFT), Physical properties, Phonons

Afiliacje autorów:
Maździarz M. - IPPT PAN
Mościcki T. - IPPT PAN
35p.
21.  Maździarz M., Mościcki T., Structural, mechanical and optical properties of potentially superhard WBx polymorphs from first principles calculations, MATERIALS CHEMISTRY AND PHYSICS, ISSN: 0254-0584, DOI: 10.1016/j.matchemphys.2016.05.014, Vol.179, pp.92-102, 2016

Streszczenie:
Five potentially superhard WBx polymorphs: hP10-P63/mmc-WB4, hP16-P63/mmc-WB3, View the MathML sourcehR24-R3¯ m-WB3, hP6-P63/mmc-WB2 and oP6-Pmmn-WB2 were thoroughly analyzed within the framework of First Principles Density Functional Theory from the structural, mechanical and optical properties point of view. None of the analyzed polymorphs have a hardness greater than 40 GPa, for the hardest one hP6-P63/mmc-WB2, Hv = 39 GPa. The most stable WBx polymorph is oP6-Pmmn-WB2 with the lowest cohesive energy Ecoh = −8.299 eV/Atom. Due to our knowledge, the optical properties of WB2 and cohesive energy of tungsten borides were presented for the first time. The best optical properties for Pulsed Laser Ablation possess hP6-P63/mmc-WB2 with the lowest reflectivity 0.343 for 355 nm laser radiation.

Słowa kluczowe:
Ab initio calculations, Mechanical properties, Hardness, Optical properties

Afiliacje autorów:
Maździarz M. - IPPT PAN
Mościcki T. - IPPT PAN
30p.
22.  Maździarz M., Gajewski M., Estimation of isotropic hyperelasticity constitutive models to approximate the atomistic simulation data for aluminium and tungsten monocrystals, CMES-COMPUTER MODELING IN ENGINEERING AND SCIENCES, ISSN: 1526-1492, Vol.105, No.2, pp.123-150, 2015

Streszczenie:
In this paper, the choice and parametrisation of finite deformation polyconvex isotropic hyperelastic models to describe the behaviour of a class of defect-free monocrystalline metal materials at the molecular level is examined. The article discusses some physical, mathematical and numerical demands which in our opinion should be fulfilled by elasticity models to be useful. A set of molecular numerical tests for aluminium and tungsten providing data for the fitting of a hypere-lastic model was performed, and an algorithm for parametrisation is discussed. The proposed models with optimised parameters are superior to those used in non-linear mechanics of crystals.

Słowa kluczowe:
Multiscale modeling, Molecular statics, Polyconvexity, Finite elas- ticity, Finite deformations, Hyperelasticity, Monocrystalline metal, Crystal elasticity

Afiliacje autorów:
Maździarz M. - IPPT PAN
Gajewski M. - inna afiliacja
25p.
23.  Cholewiński J., Maździarz M., Jurczak G., Dłużewski P., Dislocation core reconstruction based on finite deformation approach and its application to 4H-SiC crystal, INTERNATIONAL JOURNAL FOR MULTISCALE COMPUTATIONAL ENGINEERING, ISSN: 1543-1649, DOI: 10.1615/IntJMultCompEng.2014010679, Vol.12, No.5, pp.411-421, 2014

Streszczenie:
A proper reconstruction of discrete crystal structure with defects is an important problem in dislocation theory. Currently, procedures for dislocation core reconstruction presented in the literature usually neglect configuration changes. The present paper discusses a new approach, which uses an iterative algorithm to determine an atomistic configuration of the dislocation core. The mathematical background is based on finite deformation theory, in which an iterative algorithm searches for the new atomic configuration corresponding to the actual atomic configuration of the deformed crystal. Its application to the reconstruction of 4H-SiC crystal affected by the system of four threading dislocations is presented as an example. Molecular statics calculations suggest a lower potential energy, as well as dislocation core energy, per-atom energy, and per-atom stresses for the structure reconstructed by use of the iterative algorithm against the classical solution based on the Love's equations.

Słowa kluczowe:
dislocation, dislocation core energy, finite deformation, molecular statics

Afiliacje autorów:
Cholewiński J. - inna afiliacja
Maździarz M. - IPPT PAN
Jurczak G. - IPPT PAN
Dłużewski P. - IPPT PAN
25p.
24.  Maździarz M., Young T.D., Jurczak G., A study of the effect of prerelaxation on the nanoindentation process of crystalline copper, ARCHIVES OF MECHANICS, ISSN: 0373-2029, Vol.63, No.5-6, pp.533-548, 2011

Streszczenie:
This paper examines how prerelaxation effects the development of the mechanics of a nanoindentation simulation. In particular, the force-depth relation, indentation stress-strain curves, hardness and elastic modulus, are investigated through molecular statics simulations of a nanoindentation process, starting from initial relaxation by: (i) molecular dynamics and (ii) molecular statics. It is found that initial relaxation conditions change the quantitative response of the system, but not the qualitative response of the system. This has a significant impact on the computational time and quality of the residual mechanical behaviour of the system. Additionally, the method of determining of the elastic modulus is examined for the spherical and planar indenter; and the numerical results are compared. An overview of the relationship between the grain size and hardness of polycrystalline copper is examined and conclusions are drawn.

Słowa kluczowe:
molecular statics, molecular dynamics, nanoindentation, copper

Afiliacje autorów:
Maździarz M. - IPPT PAN
Young T.D. - IPPT PAN
Jurczak G. - IPPT PAN
20p.
25.  Maździarz M., Unified Isoparametric 3D Lagrange Finite Elements, CMES-COMPUTER MODELING IN ENGINEERING AND SCIENCES, ISSN: 1526-1492, Vol.66, No.1, pp.1-24, 201032p.
26.  Maździarz M., Young T.D., Dłużewski P., Wejrzanowski T., Kurzydłowski K.J., Computer modelling of nanoindentation in the limits of a coupled molecular-statics and elastic scheme, JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, ISSN: 1546-1955, DOI: 10.1166/jctn.2010.1469, Vol.7, pp.1-10, 2010

Streszczenie:
Our numerical approach to modeling elastic-plastic deformation comes back to the idea of the time-independent plasticity developed here at the molecular-statics level. We use a constitutive atomic model based on the second-moment approximation of the tight-binding potential coupled to a linear theory of elasticity solved simultaneously within the finite element method. Our model is applied to the nanoindentation problem for copper in which the indenter is represented by the equations of a sphere. For convenience the time-dependency of the nanoindentation problem is reduced to a quasi-static adiabatic scheme. A recurring theme in this paper is to determine the response of the proposed model for two differing systems: mono and polycrystalline copper. This paper discusses the force-depth response in terms of atomic bond-lengths, elastic-plastic deformations, and the instantaneous stiffness of the material. We report on an increased instantaneous stiffness of polycrystalline copper compared to that of its monocrystalline counterpart. From both a distinct and a comparative analysis of both systems, based on the relaxed positions of the atoms in the structure during the simulation, we deduce that plastic deformations at grain-boundaries are responsible for this change in the overall instantaneous stiffness of the material.

Słowa kluczowe:
linear elasticity, material science, molecular statics, nanoindentation, quasicontinuum methods

Afiliacje autorów:
Maździarz M. - IPPT PAN
Young T.D. - IPPT PAN
Dłużewski P. - IPPT PAN
Wejrzanowski T. - Politechnika Warszawska (PL)
Kurzydłowski K.J. - Politechnika Warszawska (PL)
27p.
27.  Dłużewski P., Maździarz M., Traczykowski P., Jurczak G., Niihara K., Nowak R., Kurzydłowski K., A hybrid atomistic-continuum finite element modelling of nanoindentation and experimental verification for copper crystal, COMPUTER ASSISTED METHODS IN ENGINEERING AND SCIENCE, ISSN: 2299-3649, Vol.15, pp.37-44, 2008

Streszczenie:
Problem of locally disordered atomic structure is solved by using a hybrid formulation in which nonlinear elastic finite elements are linked with discrete atomic interaction elements. The continuum approach uses nonlinear hyperelasticity based upon the generalized strain while the atomistic approach employs the Tight-Binding Second-Moment Approximation potential to create new type of elements. The molecular interactions yielding from constitutive models of TB-SMA were turned into interactions between nodes to solve a boundary value problem by means of finite element solver.
In this paper we present a novel way of modelling materials behaviour where both discrete (molecular dynamics) and continuum (nonlinear finite element) methods are used. As an example, the nanoindentation of a copper sample is modelled numerically by applying a hybrid formulation. Here, the central area of the sample subject to a nanoindentation operation is discretised by an atomic net where the remaining area of the sample far from indenters tip is discretised by the use of a nonlinear finite element mesh.

Słowa kluczowe:
Nanostructure, Nanoindentation, Molecular statics, Finite element modelling

Afiliacje autorów:
Dłużewski P. - IPPT PAN
Maździarz M. - IPPT PAN
Traczykowski P. - Institute of Plasma Physics and Laser Microfusion (PL)
Jurczak G. - IPPT PAN
Niihara K. - Nagaoka University of Technology (JP)
Nowak R. - Foundry Research Institute (PL)
Kurzydłowski K. - Politechnika Warszawska (PL)
28.  Piekarski J., Maździarz M., Glinkowski W., Telega J.J., Modeling of bone fracture healing, ACTA OF BIOENGINEERING AND BIOMECHANICS, ISSN: 1509-409X, Vol.6, No.Suppl.1, pp.191-194, 2004

Lista rozdziałów w ostatnich monografiach
1. 
Wojtiuk E., Maździarz M., Mulewska K., Chmielewski M., Hoffman J., Mościcki T., Zaawansowane badania materiałowe, diagnostyczne i obliczeniowe: wybrane osiągnięcia badawcze w IPPT PAN w 2024 roku, rozdział: Struktura i właściwości cienkich pokryć na bazie trójskładnikowych borków wolframu: teoria i eksperyment, Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk, pp.27-42, 2024
2. 
Jurczak G., Maździarz M., Dłużewski P., Nanomechanics: Selected problems, rozdział: Atomistic-continuum modelling of coupled fields and defects in semiconductor crystals, Wydawnictwo Politechniki Krakowskiej, Muc A., Chwał M., Garstecki A., Szefer G. (Eds.), pp.77-98, 2015

Prace konferencyjne
1.  Kowalczyk-Gajewska K., Maździarz M., Extension of anisotropic core-shell model to HCP Nanocrystalline metals, ICTAM2021, 25th International Congress of Theoretical and Applied Mechanics, 2021-08-22/08-27, Mediolan (virtual) (IT), pp.1-2, 2021
2.  Jurczak G., Maździarz M., Dłużewski P., Dimitrakopulos G.P., Komninou Ph., Karakostas T., On the applicability of elastic model to very thin crystalline layers, JOURNAL OF PHYSICS: CONFERENCE SERIES, ISSN: 1742-6588, DOI: 10.1088/1742-6596/1190/1/012017, No.1190, pp.012017-1-5, 2019

Streszczenie:
Elastic model of continuum material is often used to simulate the relaxation of crystalline heterostructures. There are many reports on the successful application of the theory of elasticity to nano-sized crystalline heterostructures, even if the continuum condition for them is hardly fulfilled. On the other hand, progress in epitaxial growth allows for the preparation of stable ultra-thin layers with thickness of few monolayers. For such ultra-thin layers, results provided by continuum model and molecular statics/dynamics calculations become diverging. The key problem seems to be located at the modelling of the interface between layers, which is problematic in the continuum approach. By applying a step-wise substitutive compositional interfacial function, it is possible to obtain good agreement with molecular dynamics calculations, even for a single monolayer heterostructure. We propose another approach that uses composition as an extra parameter during finite element calculations, along with classical nodal displacements. Such an approach creates a chemo-elastic coupling that allows to interpolate the composition much like in the case of atomistic calculations.

Słowa kluczowe:
ultra-thin layers, elastic relaxation, molecular statics, finite elemenet modelling

Afiliacje autorów:
Jurczak G. - IPPT PAN
Maździarz M. - IPPT PAN
Dłużewski P. - IPPT PAN
Dimitrakopulos G.P. - Aristotle University of Thessaloniki (GR)
Komninou Ph. - Aristotle University of Thessaloniki (GR)
Karakostas T. - Aristotle University of Thessaloniki (GR)
40p.
3.  Rojek J., Nosewicz S., Maździarz M., Kowalczyk P., Wawrzyk K., Lumelskyj D., Modeling of a Sintering Process at Various Scales, Procedia Engineering, ISSN: 1877-7058, DOI: 10.1016/j.proeng.2017.02.210, Vol.177, pp.263-270, 2017

Streszczenie:
This paper presents modeling of a sintering process at various scales. Sintering is a powder metallurgy process consisting in consolidation of powder materials at elevated temperature but below the melting point. Sintering models at the atomistic, microscopic and macroscopic scales have been presented. Sintering is a process governed by diffusion therefore the atomistic modeling using the molecular dynamics has been focused on investigation of the diffusion process. The micromechanical model has been developed within the framework of the discrete element method. It allows us to consider microstructure and its changes during sintering. The macroscopic model is based on the continuum phenomenological approach. It combines elastic, thermal and viscous creep deformation. The methodology to determine macroscopic quantities: stress, strains and constitutive viscous properties from the discrete element simulations has been presented. Possibilities of the developed models have been demonstrated by applying them to simulation of sintering of the intermetallic NiAl powder. Own experimental results have been used to calibrate and validate numerical models.

Słowa kluczowe:
sintering, modeling, discrete element method, diffusion, molecular dynamics, macroscopic model

Afiliacje autorów:
Rojek J. - IPPT PAN
Nosewicz S. - IPPT PAN
Maździarz M. - IPPT PAN
Kowalczyk P. - IPPT PAN
Wawrzyk K. - inna afiliacja
Lumelskyj D. - IPPT PAN
20p.
4.  Maździarz M., Nalepka K.T., Dłużewski P., Cholewiński J., Reconstruction of dislocations in interface layer Cu-Al2O3, MMM2010, 5th International Conference Multiscale Materials Modeling, 2010-10-04/10-08, Freiburg (GE), pp.482-485, 2010

Streszczenie:
Using three different methods namely, CDT (Continuous Dislocation Theory), molecular TB - SMA (Tight Binding Second Moment Approximation) type many - body potential, and MEM (Molecular Effective Medium) theory, we are looking for the best possible reconstruction of dislocations in Cu - Al 2 O 3 heterostructure.

Afiliacje autorów:
Maździarz M. - IPPT PAN
Nalepka K.T. - IPPT PAN
Dłużewski P. - IPPT PAN
Cholewiński J. - inna afiliacja

Abstrakty konferencyjne
1.  Burczyński T., Kuś W., Maździarz M., Mrozek A., ARTIFICIAL INTELLIGENCE IN DESIGN OF NEW NANOSTRUCTURES, ECCOMAS Congress 2024, 9th European Congress on Computational Methods in Applied Sciences and Engineering, 2024-07-03/07-07, Lizbona (PT), pp.1-1, 2024

Słowa kluczowe:
Methods of computational intelligence, 2D nanostructures, Molecular dynamics

Afiliacje autorów:
Burczyński T. - IPPT PAN
Kuś W. - Silesian University of Technology (PL)
Maździarz M. - IPPT PAN
Mrozek A. - AGH University of Science and Technology (PL)
2.  Mościcki T., Maździarz M., Wojtiuk E., Psiuk R., Design of W-Al-B film properties: ab initio calculations and HiPIMS/DCMS combined deposition method, SolMech 2024, 43rd Solid Mechanics Conference, 2024-09-16/09-18, Wrocław (PL), pp.26-26, 2024

Słowa kluczowe:
Ternary transition metal diboride thin films, Mechanical properties, HiPIMS/DC magnetron sputtering, wear resistance and adhesion, DFT Methods

Afiliacje autorów:
Mościcki T. - IPPT PAN
Maździarz M. - IPPT PAN
Wojtiuk E. - IPPT PAN
Psiuk R. - IPPT PAN
3.  Maździarz M., Suitability of the available interatomic potentials for the modeling of 2D materials, MLM4MS, Machine Learning Modalities for Materials Science, 2024-01-13/01-17, Jožef Stefan Institute, Ljubljana Slovenia (SI), pp.1, 2024

Streszczenie:
Most interatomic potentials, both classical and machine learning-based (MLPs), are parameterized for 3D structures. The question naturally arises whether they are suitable for modeling their 2D allotropes. In the present study, using ab initio calculations, we determined the structural and mechanical properties of 2D phases of materials such as MoS2, Si, Ge and Sn and then investigated whether the available potentials are able to reproduce these properties.

Słowa kluczowe:
2D materials; interatomic potentials

Afiliacje autorów:
Maździarz M. - IPPT PAN
4.  Mościcki T., Maździarz M., Psiuk R., Jarząbek D., Effect of transition metal doping on mechanical properties of tungsten diboride on the base of first-principles calculations and experimental investigations on magnetron sputtered films, MBMST 2023, 14th International Conference Modern Building Materials, Structures and Techniques, 2023-10-05/10-06, Wilno (LT), pp.1-1, 2023
5.  Maździarz M., Nosewicz S., Molecular dynamics modeling of deformation and damage behaviour of main structural components of NiAl-Al2O3 composite, COMPOSITES 2023, 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2023, 2023-09-12/09-14, Trapani (IT), pp.1, 2023
6.  Burczyński T., Kuś W., Maździarz M., Mrozek A., DESIGN OF NANOSTRUCTURES BASED ON MOLYBDENUM, CMM-SolMech 2022, 24th International Conference on Computer Methods in Mechanics; 42nd Solid Mechanics Conference, 2022-09-05/09-08, Świnoujście (PL), No.268, pp.1-1, 2022
7.  Burczyński T., Kuś W., Maździarz M., Mrozek A., Intelligent design of new 2D nano-materials, 25th International Congress of Theoretical and Applied Mechanics, 2021-08-22/08-27, Montreal (CA), pp.1-2, 2021
8.  Burczyński T., Maździarz M., Mrozek A., Kuś W., Designing of new 2d semiconducting carbon allotrope as an inverse problem, IPM 2019, 5th ECCOMAS Thematic Conference on Inverse Problems Methods, 2019-05-22/05-24, Rzeszów-Kombornia (PL), pp.1-2, 2019
9.  Burczyński T., Kuś W., Maździarz M., Mrozek A., Computational intelligence in design of new nanomaterials, Computational Sciences and AI in Industry, 2019-06-12/06-14, Jyvaskyla (FI), pp.1, 2019
10.  Burczyński T., Kuś W., Maździarz M., Mrozek A., Molecular and Ab-initio Approaches in Computational Design of New 2D Nano-Structures, COUPLED 2019, VIII International Conference on Coupled Problems in Science and Engineering, 2019-06-03/06-05, Sitges (ES), pp.1, 2019
11.  Nosewicz S., Rojek J., Wawrzyk K., Kowalczyk P., Maciejewski G., Maździarz M., Three-scale modelling of hot pressing process, PCM-CMM, 4th Polish Congress of Mechanics, 23rd International Conference on Computer Methods in Mechanics, 2019-09-08/09-12, Kraków (PL), pp.1, 2019
12.  Nosewicz S., Rojek J., Wawrzyk K., Kowalczyk P., Maciejewski G., Maździarz M., Modeling of sintering process of intermetallic NiAl powder using multiscale approach, IWCMM29, 29th International Workshop on Computational Mechanics of Materials, 2019-09-15/09-18, Dubrovnik (HR), pp.1, 2019
13.  Nosewicz S., Rojek J., Wawrzyk K., Kowalczyk P., Maciejewski G., Maździarz M., Multiscale prediction of powder properties during pressure-assisted sintering, CM4P, Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems, 2019-07-15/07-17, Porto (PT), pp.1, 2019
14.  Kowalczyk-Gajewska K., Maździarz M., Two-phase mean-field estimate for the effective stiffness tensor of nanocrystalline materials of cubic symmetry, SES2018, 55th Annual Technical Meeting of the Society of Engineering Science, 2018-10-10/10-12, Madrid (ES), pp.1, 2018
15.  Nosewicz S., Rojek J., Wawrzyk K., Kowalczyk P., Maciejewski G., Maździarz M., Multiscale modeling of sintering process of mixture of two-phase powder, 8th KMM-VIN Industrial Workshop: Modelling of composite materials and composite coatings, 2018-10-09/10-10, Freiburg (DE), pp.1, 2018
16.  Nosewicz S., Rojek J., Maciejewski G., Maździarz M., Chmielewski M., Two-scale modelling of powder sintering, SolMech 2018, 41st SOLID MECHANICS CONFERENCE, 2018-08-27/08-31, Warszawa (PL), pp.210-211, 2018
17.  Jurczak G., Maździarz M., Dłużewski P., Dimitrakopulos G., Komninou Ph., Karakostas T., On the Applicability of the Theory of Elasticity to Very Thin Layers, EDS2018, 19th International Conference on Extended Defects in Semiconductors, 2018-06-24/06-29, Thessaloniki (GR), pp.1, 2018

Streszczenie:
Theory of elasticity, a continuum model of a macroscopic material is commonly used to model a relaxation of a crystalline heterostructures. There are many reports on the successful application of theory of elasticity to nanometer crystalline heterostructures, even if the continuum condition for these structures is hardly fulfilled. On the other hand progress in epitaxial growth techniques allows to prepare the stable ultra thin layers with the thickness about a single monolayer. For such extremely thin layers the theory of elasticity seems to fail in describing the relaxation process. The results provided by theory of elasticity and experimental measurements or molecular statics/dynamics become diverging. The key problem in that case seems to be located at the interface between layers and related to composition change, which is problematic in classic, elastic approach. By applying a "substitutive" composition of the interface layers which is just an interpolation, it is possible to obtain a good agreement with molecular statics, even for 1 monolayer heterostructure. Instead of classic approach to the composition within the theory of elasticity, we propose another approach which takes into account the composition as an extra degree of freedom along with classical displacement. Such approach creates a chemo-elastic coupling with composition interpolated by use of the Vegard's law. This allows to take into account a composition changes at the interface and avoid mesh refining necessary at the classic approach.

Słowa kluczowe:
theory of elasticity, semiconductor, monolayer, relaxation

Afiliacje autorów:
Jurczak G. - IPPT PAN
Maździarz M. - IPPT PAN
Dłużewski P. - IPPT PAN
Dimitrakopulos G. - Aristotle University of Thessaloniki (GR)
Komninou Ph. - Aristotle University of Thessaloniki (GR)
Karakostas T. - Aristotle University of Thessaloniki (GR)
18.  Rojek J., Nosewicz S., Maździarz M., Kowalczyk P., Wawrzyk K., Multiscale modelling of powder sintering processes, COMPLAS 2017, XIV International Conference on Computational Plasticity. Fundamentals and Applications, 2017-09-05/09-07, Barcelona (ES), pp.1, 2017
19.  Rojek J., Nosewicz S., Maździarz M., Kowalczyk P., Wawrzyk K., Modelling of sintering at atomistic, microscopic and macroscopic scales, Komplastech 2017, XXIV International Conference on Computer Methods in Materials Technology, 2017-01-15/01-18, Zakopane (PL), pp.126-128, 2017
20.  Nosewicz S., Rojek J., Maździarz M., Kowalczyk P., Wawrzyk K., Chmielewski M., Pietrzak K., Multiscale modeling of pressure-assisted sintering process, EUROMAT 2017, European Congress and Exhibition on Advanced Materials and Processes, 2017-09-17/09-22, Thessaloniki (GR), pp.D10-I-P-TUE-P1-6-D10-I-P-TUE-P1-6, 2017
21.  Jurczak G., Maździarz M., Dłużewski P., Finite element modelling of threading dislocation effect on GaN/AlN quantum dot, ICMM5, 5th International Conference on Material Modeling, 2017-06-14/06-16, Rome (IT), pp.1-1, 2017

Słowa kluczowe:
Quantum dot, Threading dislocation, Piezoelectricity, Finite element modelling

Afiliacje autorów:
Jurczak G. - IPPT PAN
Maździarz M. - IPPT PAN
Dłużewski P. - IPPT PAN
22.  Maździarz M., Rojek J., Nosewicz S., Molecular dynamics study of self-diffusion in stoichiometric B2-NiAl, CMN2017, Congress on Numerical Methods in Engineering, 2017-07-03/07-05, Valencia (ES), pp.1373-1373, 2017
23.  Maździarz M., Rojek J., Nosewicz S., Estimation of micromechanical NiAl sintering model parameters from the Atomistic Simulations, VII International Conference on Coupled Problems in Science and Engineering, 2017-06-12/06-14, Rhodes Island (GR), pp.1-1, 2017
24.  Rojek J., Nosewicz S., Maździarz M., Kowalczyk P., Wawrzyk K., Modelling of powder sintering at various scales, SolMech 2016, 40th Solid Mechanics Conference, 2016-08-29/09-02, Warszawa (PL), No.P193, pp.1-2, 2016

Słowa kluczowe:
sintering, multiscale modelling

Afiliacje autorów:
Rojek J. - IPPT PAN
Nosewicz S. - IPPT PAN
Maździarz M. - IPPT PAN
Kowalczyk P. - IPPT PAN
Wawrzyk K. - inna afiliacja
25.  Maździarz M., Rojek J., Nosewicz S., Molecular dynamics/statics simulation of Ni-Al nanoparticles sintering, ECCOMAS 2016, European Congress on Computational Methods in Applied Sciences and Engineering, 2016-06-05/06-10, Hersonissos (GR), pp.1, 2016

Słowa kluczowe:
Sintering, Powder Material, Ni-Al, Molecular Dynamics, Molecular Statics

Afiliacje autorów:
Maździarz M. - IPPT PAN
Rojek J. - IPPT PAN
Nosewicz S. - IPPT PAN
26.  Dłużewski P., Maździarz M., Tauzowski P., Constitutive and FE modeling of Residual Stresses and Kirkendall Effect in Semiconductor Structures, 4th International Conference on Material Modeling, 2015-05-27/05-29, Berkeley (US), pp.79-80, 2015

Streszczenie:
The interdiffusion of chemical components coupled with vacancy movement can cause void formation and/or spinodal decomposition in crystal growth. In the case of SiC growth on Si, the higher mobility of Si atoms compared to C results in the migration of SiC/Si interface and formation of voids in the substrate in some thermodynamic conditions. In the case of In -rich InGaN layers deposited on GaN a precipitation of metallic indium bordering with voids is observed. In the current approach we consider interdiffusion, lattice distortion and chemical maps extracted from HRTEM images of SiC/Si and InGaN/GaN. Dislocations and void surface are treated as local regions of nucleation and annihilation of the vacancies transporting the mass in FE mesh. In result, the interface and FE mesh are convected with the crystal lattice drift. In the constitutive modeling applied [1] the lattice strain and the atom fraction of chemical component are used as two independent thermodynamic variables. Due to climbing of misfit dislocations the plastic distortion tensor field is taken into account in the form of additional nodal variables. This tensor field is spanned on corner nodes of Lagrangian finite elements (FE) which gives the possibility for reconstruction of the atomistic model of dislocation network interpenetrating the considered FE mesh [2,3]. The chemo-mechanical coupling is based on the use of Vegard's law formulated in terms of Biot strain. Due to the logarithmic strain applied in hyperelastic modeling, some transformation rule is considered for Vegard's law. This rule allowed us to eliminate artificial residual stresses yielding from incompatibe fields of the atom fraction and plastic distortions spanned on nodes by means of shape functions [2]. In the case of single finite elements, the mentioned approach allowed us to reduce spurious stresses in integration points from the level 100 MPa to 10^ -5 MPa, while at the same time holding the stress components yielding from Vegard's law at the level of 1 GPa (relaxed by plastic distortions).

Słowa kluczowe:
Constitutive modelling, Finite Element Method

Afiliacje autorów:
Dłużewski P. - IPPT PAN
Maździarz M. - IPPT PAN
Tauzowski P. - IPPT PAN
27.  Dłużewski P., Maździarz M., Tauzowski P., Third-order elastic coefficients and logarithmic strain in finite element modelling of anisotropic elasticity, SolMech 2014, 39th Solid Mechanics Conference, 2014-09-01/09-05, Zakopane (PL), pp.35-36, 2014

Streszczenie:
Contrary to higher order elastic constants for momentum stresses the second (classical) and third-order elastic coefficients (TOEC) for symmetric elasticity are measured and tabulated successfully with good accuracy for tens of years. In the classical experimental measurements of TOEC, the correct recalculation of instantaneous stiffness changes onto TOEC has an important role. A similar problem arises in the constitutive and finite element (FE) modelling. Namely, because of a very strong dependency of TOEC on the strain measure choice, the constitutive and FE modelling of elastic materials is considered here in terms of different finite strain measures. To this aim, the known analytical formulae for calculation of two first derivatives of the isotropic tensor function of tensor variable are verified by means of the finite difference method. In result, the revised formulae are used for calculation of the tangent stiffness matrix. This paper closes with some remarks on the use of TOEC in finite element modelling.

Słowa kluczowe:
nonlinear elasticity, third-order elastic coefficients, logarithmic strain

Afiliacje autorów:
Dłużewski P. - IPPT PAN
Maździarz M. - IPPT PAN
Tauzowski P. - IPPT PAN
28.  Jurczak G., Maździarz M., Dłużewski P., Effect of threading dislocation on elastic and electric properties of semipolar GaN/AlN quantum dot, ICMM3, 3rd International Conference on Material Modelling incorporating 13th European Mechanics of Materials Conference, 2013-09-08/09-11, Warszawa (PL), pp.186-187, 2013

Słowa kluczowe:
Semiconductor, Piezoelectricity, Dislocation

Afiliacje autorów:
Jurczak G. - IPPT PAN
Maździarz M. - IPPT PAN
Dłużewski P. - IPPT PAN
29.  Maździarz M., Nalepka K.T., Szymański Z., Hoffman J., Kret S., Kucharski S., Nalepka P., Atomistic Model of Decohesion of Copper-Corundum Interface, SolMech 2012, 38th Solid Mechanics Conference, 2012-08-27/08-31, Warszawa (PL), pp.204-205, 2012
30.  Maździarz M., Nalepka K.T., Modified RGL Potential for FCC Metals, KKNM2012, III Krajowa Konferencja Nano i Mikromechaniki, 2012-07-04/07-06, Warszawa (PL), pp.1-2, 2012
31.  Dłużewski P., Cholewiński J., Maździarz M., Tauzowski P., Nalepka K.T., Atomistic/continuum reconstruction of misfit dislocations and stacking faults in Cu/sapphire interfacial region, CMM 2011, 19th International Conference on Computer Methods in Mechanics, 2011-05-09/05-12, Warszawa (PL), pp.257-1-2, 2011

Streszczenie:
A method for reconstruction of atomistic models of dislocations and stacking faults in the interfacial region of heterostructures is presented. Its mathematical foundations come back to the algebra of the finite deformation fields related to introducing of discrete dislocations into an initially coherent interface. From the practical point of view the method concerns generation of interfacial regions with misfit/treading partial dislocations and stacking faults being formed in the interfacial region between crystal structures of different crystallographic type.

Słowa kluczowe:
atomistic models, dislocations, stacking faults, lattice distortion

Afiliacje autorów:
Dłużewski P. - IPPT PAN
Cholewiński J. - inna afiliacja
Maździarz M. - IPPT PAN
Tauzowski P. - IPPT PAN
Nalepka K.T. - IPPT PAN
32.  Maździarz M., Young T.D., Jurczak G., Pre-Relaxation effect in computer modeling of nanoindentation, SolMech 2010, 37th Solid Mechanics Conference, 2010-09-06/09-10, Warszawa (PL), pp.56-57, 2010

Słowa kluczowe:
molecular statics, molecular dynamics, nanoindentation, copper

Afiliacje autorów:
Maździarz M. - IPPT PAN
Young T.D. - IPPT PAN
Jurczak G. - IPPT PAN

Kategoria A Plus

IPPT PAN

logo ippt            ul. Pawińskiego 5B, 02-106 Warszawa
  +48 22 826 12 81 (centrala)
  +48 22 826 98 15
 

Znajdź nas

mapka
© Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk 2024