Partnerzy

Streszczenie:
The presented dataset contains spatial models of cones formed from lunar soil simulants. The cones were formed in a laboratory by allowing the soil to fall freely through a funnel. Then, the cones were measured using three methods: a high-precision handheld laser scanner (HLS), photogrammetry, and a low-cost LiDAR system integrated into an iPad Pro. The dataset consists of two groups. The first group contains raw measurement data, and the second group contains the geometry of the cones themselves, excluding their surroundings. This second group was prepared to support the calculation of the cones’ volume. All data are provided in standard 3D file format (.STL). The dataset enables direct comparison of resolution and geometric reconstruction performance across the three techniques and can be reused for benchmarking 3D processing workflows, segmentation algorithms, and shape reconstruction methods. It provides complete geometric information suitable for validating automated extraction procedures for parameters such as cone height, base diameter, and angle of repose, as well as for further research into planetary soil and granular material morphology.

Słowa kluczowe:
handheld laser scanning, photogrammetry, low-cost LiDAR, 3D modeling, regolith simulants, cone geometry, laboratory measurement

Streszczenie:
Accurate characterization of lunar regolith is essential for planning future surface operations and construction activities. In this work, we compare three 3D measurement techniques for laboratory-scale regolith simulant (LSS) cones: a high-precision handheld laser scanner (HLS), a photogrammetry workflow, and the LiDAR sensor embedded in an iPad Pro. The experiments focused on evaluating the geometric parameters of cone height, base diameter, angle of repose, and volume. HLS and photogrammetry produced closely matching results, with mean observed differences of 0.5 ± 0.4 mm for heights, 0.4 ± 0.2 mm for diameters, and 0.15 ± 0.14° for repose angles. Volumes derived from these two methods differed by less than 1.8 %. By contrast, the iPad LiDAR underestimated cone heights with a mean error of 9.1 ± 2.9 mm and overestimated base diameters by 9.6 ± 6.1 mm, leading to mean angle deviations of 2.63 ± 0.97°. Photogrammetry was intentionally simplified so that its data acquisition time matched that of the HLS, providing a practical efficiency-based comparison rather than maximum accuracy. Although based on single trials, the findings demonstrate that HLS and photogrammetry can deliver consistent results for small regolith features, while low-cost mobile LiDAR remains unsuitable for sub-centimeter measurements. This study highlights the potential of integrating different 3D measurement approaches for rapid regolith assessment, offering insights into future lunar applications.

Słowa kluczowe:
Lunar soil simulant, LSS, LiDAR, Scanner, Photogrammetry

Streszczenie:
This article aims to explore the potential of using low-cost devices (iPhone and iPad) equipped with LiDAR scanners in the context of measuring the volume of concrete-plastic specimens with complex shapes. The goal was to assess whether these tools can support or even replace traditional metrology methods. For the purpose of the research program concrete-plastic columns with very complex cross-sections (based on different fractals) were harnessed. The research team was focused on analyzing the potential of using this technology to measure the volume of concrete-plastic structural elements created with the help of 3D printing. The tests were conducted under laboratory conditions. The effectiveness of the proposed approach was compared with results obtained using photogrammetry. The challenges of measurement accuracy, the impact of specimen shape, the impact of material and needed optimization of post-processing on the achieved results were also discussed.

Słowa kluczowe:
3-D printing, LiDAR, Scanning, Fractals, Concrete

Streszczenie:
This dataset presents experimental data on the use of low-cost LiDAR scanners (integrated with iPads and iPhones) to evaluate the deformation of plastic-concrete specimens with fractal-based cross-sections. The specimens were created using 3D printed lost formwork and concrete. The dataset includes mesh models acquired using low-cost LiDAR technology and photogrammetry before and after the loading tests. This allows for the evaluation of geometric deformations and volume changes in specimens of varying cross-sectional complexity.
The measurements were performed in a controlled laboratory environment, where LiDAR-based volume calculations were compared with high-precision photogrammetric reference data. The dataset includes information on scanning conditions, point cloud processing techniques, and measurement errors, providing insight into the accuracy and repeatability of low-cost LiDAR technology in structural assessment.
This dataset is valuable to researchers investigating low-cost metrology, LiDAR-based strain monitoring, and the application of consumer-grade scanning technology in civil engineering and materials science. It enables further analysis of the accuracy of mobile LiDAR for measuring complex geometries and deformations of structures.

Słowa kluczowe:
Low-cost LiDAR, 3D printing, Point cloud analysis, Fractals, Concrete