Institute of Fundamental Technological Research
Polish Academy of Sciences

Partners

Kurt Frischmuth

University of Rostock (DE)

Doctoral thesis

1983

Zagadnienia modelowania konstytutywnego i stabilności ciał dyssypatywnych

supervisor -- Prof. Piotr Perzyna, PhD, DSc, IPPT PAN

Recent publications

Bogacz R.^♦, Frischmuth K.^♦, On dynamic effects of wheel–rail interaction in the case of Polygonalisation, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, ISSN: 0888-3270, DOI: 10.1016/j.ymssp.2016.03.001, Vol.79, pp.166-173, 2016

Abstract:
Following earlier work of the authors [1], we study here the influence of surface imperfections of a certain type on the vertical loading, in particular in the form of fluctuations in the progressive speed of a moving force. The problem is partly associated with another line of work, where we analyzed configurations of regions in the parameter space with qualitatively different solutions for supported beams under moving loads [2]. In this paper, we study the rolling motion of a polygonalised railway wheel on the rail. For uniform guiding motion, the trajectory of the contact point and vertical accelerations are evaluated first in the rigid case, then in the case of elastic and visco-elastic contact. It will be pointed out that a wavy form of the wheel changes considerably the longitudinal velocity of contact points, even for constant speed of the wheel center which can be are as on for instability.

Keywords:
Railway mechanics, Contact problem, Wave generation

Affiliations:

Bogacz R.	-	other affiliation
Frischmuth K.	-	University of Rostock (DE)

Bogacz R., Frischmuth K.^♦, On some corrugation related dynamical problems of wheel/rail interaction, ARCHIVES OF TRANSPORT, ISSN: 0866-9546, Vol.XXII, No.1, pp.27-41, 2010

Abstract:
We simulate the motion of a corrugated disk over a corrugated track under unilateral elastic contact forces. In particular, the trajectory of the geometrical contact point and the magnitude of normal forces are studied. Effects like generation of waves and cumulation of plastic deformation are considered.

Keywords:
railway mechanics, contact geometry, friction, bouncing, wave generation, plastic deformation

Affiliations:

Bogacz R.	-	IPPT PAN
Frischmuth K.	-	University of Rostock (DE)

Bogacz R., Frischmuth K.^♦, Mechanical problems with moving load, Scientific papers of Techn. Univ. Radom TRANSPORT, Vol.3, No.23, pp.35-42, 2005

Abstract:
We study periodic structures composed of beams, columns and plates subjected to moving constant or harmonic loads. Such structures occur in civil engineering, e.g. classical tracks or maglev guideways, highways or tarmacs of airports. We discuss the influence of speed and frequencies as well as parameters describing the construction itself.

Keywords:
periodic structures, moving constant loads, moving harmonic loads

Affiliations:

Bogacz R.	-	IPPT PAN
Frischmuth K.	-	University of Rostock (DE)

Perzyna P., Frischmuth K.^♦, Kosiński W., Remarks on mathematical theory of materials, ARCHIVES OF MECHANICS, ISSN: 0373-2029, Vol.38, pp.59-69, 1986

Perzyna P., Frischmuth K.^♦, Thermodynamics of the modified material structure with internal state variables, ARCHIVES OF MECHANICS, ISSN: 0373-2029, Vol.35, pp.279-286, 1983

Frischmuth K.^♦, Zagadnienia modelowania konstytutywnego i stabilności ciał dyssypatywnych (Praca doktorska), Prace IPPT - IFTR Reports, ISSN: 2299-3657, No.38, pp.1-60, 1982

List of chapters in recent monographs

Bogacz R., Chudzikiewicz A.^♦, Frischmuth K.^♦, Materiały IX Warsztatów Polskiego Towarzystwa Symulacji Komputerowej "Symulacja w badaniach i rozwoju", rozdział: Friction, wear and heat, PTSK, Bobrowski L., Tylikowski A. (Eds.), pp.67-76, 2005

Conference papers

Bogacz R., Frischmuth K.^♦, Models of surface pattern development in rolling contact, TRANSCOMP, X Miedzynarodowa Konferencja Komputerowe Systemy Wspomagania Nauki, Przemysłu i Transportu, 2006-12-04/12-07, Zakopane (PL), Vol.I, pp.59-64, 2006

Abstract:
We study the rolling motion of a railway wheel on corrugated track. For uniform guiding motion, the trajectory of the contact point, vertical accelerations are evaluated first in the rigid case, then in the case of elastic and visco-elastic contact. Resulting energy dissipation due to friction and percussive effects are calculated and resulting progress of pattern formation is simulated.

Keywords:
rolling contact, surface pattern, railway wheel, corrugated track

Affiliations:

Bogacz R.	-	IPPT PAN
Frischmuth K.	-	University of Rostock (DE)

Bogacz R., Imiełowski Sz., Frischmuth K.^♦, On stability and optimization of cracked columns subjected to compressive circulatory load, XXII Symposium Vibration in Physical Systems, 2006-04-19/04-22, Poznań-Będlewo (PL), pp.83-88, 2006

Abstract:
Maximization of the critical force of cracked columns, subjected to generalized follower force is discussed in the paper. The crack is assumed to be formed according to the opening and sliding modes and is modeled by a localized loss of stiffness. Influence of the crack stiffness and its localization on the value of the critical force is analyzed. The optimization process is based on the multimodal approach.

Keywords:
localization of crackoptimization of cracked columns, stability constraints, follower load,

Affiliations: