Partners

Abstract:
The paper presents a comprehensive investigation of the influence of the main process parameters of spark plasma sintering on the mechanical and microstructural properties of nickel-silicon carbide composites at various scales. Microstructure analysis performed by scanning and transmission electron microscopy revealed a significant interfacial reaction between nickel and silicon carbide due to the decomposition of silicon carbide. The chemical interaction of the matrix and reinforcement results in the formation of a multicomponent interphase zone formed by silicides (Ni31Si12 or/and Ni3Si) and graphite precipitates. Furthermore, several types of structure defects were observed (mainly nano/micropores at the phase boundaries). These significantly influenced the mechanical response of nickel-silicon carbide composites at different levels. At the macroscopic scale, uniaxial tensile tests confirmed that applying a 1000 oC sintering temperature ensured that the manufactured composite was characterised by satisfactory tensile strength, however, with a considerable reduction of material elongation compared to pure nickel. Moreover, the fractography study allowed us to identify a significant difference in the damage mode for certain nickel-silicon carbide samples. Secondly, the interface of the nickel matrix and silicate interphase was tested by bending with microcantilevers to evaluate its deformation behaviour, strength, and fracture characteristics. It was confirmed that a diffusive kind of interface, such as Ni-NiSi, demonstrates unexpected bonding properties with a relatively large range of plastic deformation. Finally, the nanoindentation of three main components of the nickel-silicon carbide composite was executed to evaluate the evolution of nanohardness, Young’s modulus, and elastic recovery due to the application of various spark plasma sintering conditions.

Keywords:
nickel-based composite,silicon carbide,spark plasma sintering,multiscale characterization,mechanical properties,nanoindentation,bending of microcantilevers

Abstract:
Experiments were conducted to investigate, within the framework of a multiscale approach, the mechanical enhancement, deformation and damage behavior of copper–silicon carbide composites (Cu–SiC) fabricated by spark plasma sintering (SPS) and the combination of SPS with high-pressure torsion (HPT). The mechanical properties of the metal–matrix composites were determined at three different length scales corresponding to the macroscopic, micro- and nanoscale. Small punch testing was employed to evaluate the strength of composites at the macroscopic scale. Detailed analysis of microstructure evolution related to SPS and HPT, sample deformation and failure of fractured specimens was conducted using scanning and transmission electron microscopy. A microstructural study revealed changes in the damage behavior for samples processed by HPT and an explanation for this behavior was provided by mechanical testing performed at the micro- and nanoscale. The strength of copper samples and the metal–ceramic interface was determined by microtensile testing and the hardness of each composite component, corresponding to the metal matrix, metal–ceramic interface, and ceramic reinforcement, was measured using nano-indentation. The results confirm the advantageous effect of large plastic deformation on the mechanical properties of Cu–SiC composites and demonstrate the impact on these separate components on the deformation and damage type.

Keywords:
copper–silicon carbide composite, high-pressure torsion, metal–matrix composites, multiscale analysis, nano-indentation, small punch test

Abstract:
This investigation examines the problem of homogenization in metal matrix composites (MMCs) and the methods of increasing their strength using severe plastic deformation (SPD). In this research MMCs of pure copper and silicon carbide were synthesized by spark plasma sintering (SPS) and then further processed via high-pressure torsion (HPT). The microstructures in the sintered and in the deformed materials were investigated using Scanning Electron Microscopy (SEM) and Scanning Transmission Electron Microscopy (STEM). The mechanical properties were evaluated in microhardness tests and in tensile testing. The thermal conductivity of the composites was measured with the use of a laser pulse technique. Microstructural analysis revealed that HPT processing leads to an improved densification of the SPS-produced composites with significant grain refinement in the copper matrix and with fragmentation of the SiC particles and their homogeneous distribution in the copper matrix. The HPT processing of Cu and the Cu–SiC samples enhanced their mechanical properties at the expense of limiting their plasticity. Processing by HPT also had a major influence on the thermal conductivity of materials. It is demonstrated that the deformed samples exhibit higher thermal conductivity than the initial coarse-grained samples.

Keywords:
copper, silicon carbide, high-pressure torsion, spark plasma sintering, thermal conductivity

Abstract:
The presented research investigation comprises the study of the mechanical properties of modified copper–silicon carbide composites at the micro- and macroscopic scale. The improvement of a copper–silicon carbide composite refers to the addition of a protective layer at the ceramic reinforcement in order to prevent the dissolution of silicon in the copper matrix. The macromechanical behaviour has been evaluated by the performance in a small punch test. The investigation has been carried out with samples with varying volume content of ceramic reinforcement and different protective layers of the silicon carbide particles. Moreover, the influence of temperature during the strength test has been studied. Next, the results have been referred to the interfacial bonding strength of Cu and SiC particles. SEM characterization of samples has been performed to link the composites' microstructure with the mechanical behaviour. Finally, the experimental results of the small punch test have been predicted via a numerical approach. Finite element analysis has been employed to reproduce the response of the composite specimen during the test. Satisfactory agreement with the experimental curve has been obtained.

Keywords:
metal matrix composites, silicon carbide, metallic layers deposition, small punch, interface strength, finite element method

Abstract:
A contact model for the normal interaction between elastoplastic spherical discrete elements has been investigated in the present paper. The Walton–Braun model with linear loading and unloading has been revisited. The main objectives of the research have been to validate the applicability of the linear loading and unloading models and estimate the loading and unloading stiffness parameters. The investigation has combined experimental tests and finite element simulations. Both experimental and numerical results have proved that the interaction between the spheres subjected to a contact pressure inducing a plastic deformation can be approximated by a linear relationship in quite a large range of elastoplastic deformation. Similarly, the linear model has been shown to be suitable for the unloading. It has been demonstrated that the Storåkers model provides a good evaluation of the loading stiffness for the elastoplastic contact and the unloading stiffness can be assumed as varying linearly with the deformation of the contacting spheres. The unloading stiffness can be expressed in a convenient way as a function of the Young's modulus and certain scaling factor dependent on the dimensionless parameter defining the level of the sphere deformation.

Keywords:
contact, discrete element method, elastoplastic, spheres, unloading

Abstract:
In this paper, small punch test (SPT) which is one of miniaturized samples technique, was employed to characterize the mechanical properties of carbon steel P110. The tests were carried out in the range of –175°C to RT. Results obtained for SPT were compared to those calculated for tensile and Charpy impact test. Based on tensile and SPT parameters numerical model was prepared. 8 mm in diameter and 0.8 mm in height (t) discs with and without notch were employed in this research. The specimens had different depth notch (a) in the range of 0.1 to 0.4 mm. It was estimated that α factor for comparison of Tsp and DBTT for carbon steel P110 is 0.55 and the linear relation is DBTT = 0.55TSPT. The numerical model fit with force - deflection curve of SPT. If the factor of notch depth and samples thickness is higher than 0.3 the fracture mode is transformed from ductile to brittle at -150°C.

Keywords:
small punch test, carbon steel P110, small samples, low temperature, mechanical properties

Abstract:
This paper constitutes an analysis of the effect of heat treatment time on the properties of Cr-Re-Al2O3 composite materials. It was found that as a result of sintering, rhenium is dissolved in chromium to create chromium-rhenium solid solution. This process is time-dependent, therefore as the time extends, the structure of material becomes homogenous, which improves its mechanical properties. Within the frame of herein presented studies, a series of technological tests have been carried out for a constant sintering temperature (1450°C) and pressure (30 MPa), with the use of a variable holding time in the maximum temperature. As a result, changes in the structure of Crsingle bondRe matrix have been determined and the resulting changes in the properties of composite. Based on those tests, optimal conditions of the sintering process have been determined from the point of view of obtaining a homogenous structure and the most beneficial properties of Cr-Re-Al2O3 composites.

Keywords:
Metal-matrix composites (MMCs), Mechanical properties, Mechanical testing, Sintering

Abstract:
Evolution of the density and the microstructure during hot pressing of NiAl/Al2O3 composite has been investigated in the present paper. In particular, the effect of the process parameters, viz. compacting pressure, sintering temperature and sintering time, on the evolution of the density of the intermetallic–ceramic composite has been studied. Evolution of the density has been related to microstructure changing. Porosity, pore structures and grains rearrangement have been analysed in microscopic observations.

Keywords:
hot pressing, sintering, intermetallic–ceramic composite, density evolution, microstructure

Abstract:
The influence of hot pressing conditions on mechanical properties of nickel aluminide/alumina composite has been investigated in the present paper. In particular, effect of the process parameters, viz. compacting pressure, sintering temperature and sintering time on the evolution of density, elastic constants and tensile strength properties of the intermetallic-ceramic composite has been studied. Elastic constants, the Young's modulus and Poisson's ratio, have been evaluated using an ultrasonic testing method, and the tensile strength has been determined by a Brazilian-type splitting test. Microscopic observations of microstructure evolution complemented the experimental procedure. Experimental results have been confronted with theoretical models showing a good agreement between the data compared.

Keywords:
Hot pressing, sintering, intermetallic-ceramic composite, elastic properties, Brazilian test, tensile strength, ultrasonic method